09-16-2016, 02:30 PM
That's a thought. No fogging the shop and your lungs with coolant (that's why I do not like mist units). No splashing of coolant all over the machine, floor, walls, etc.
I could see one using both on a mill, but not at the same time. The air unit would be especially effective when using a carbide face mill.
Turning on the lathe is another potential use of the air unit.
I could see one using both on a mill, but not at the same time. The air unit would be especially effective when using a carbide face mill.
Turning on the lathe is another potential use of the air unit.