Pressure Washer

[f350ca]

Do you want the price in real money or our funny money. $400 to the door, found the same pump mounted to a Baldor 3 hp with a rack holding the reel and switch ready to bolt on the wall for $2600 US on sale from $3400.
Made the tool post on the shaper, but in my infinite wisdom didn't make the tool holders a standard size, so you have to come to me if you want extras.
Thanks Al, a welding lathe is on the project list. Salvaged (imagine that) two 12volt gear head motors from some golf thingy that drives your clubs around. What fun can that be. Anyway I ordered some PWM voltage controls from china. It will rotate the part and feed the mig gun along the carnage to build up the shaft.

The key installed.


The motor has a ring but its not really a flange mount so I had to make a step plate to marry the two halfs.



Now it gets interesting. The two bolt patterns are close but no cigar, so the plan is to thread the adaptor, loctite studs in it for the pump, then drill and thread the bolt pattern for the motor in them.