referb of a magnetic V block

[krv3000]

HI all a bit off topic at first i went to see rob Wilson at his work shop and a nice shop it is two and his shiny bits are even more shiny up close thanks for letting me play right on leaving he gave me a well beet up magnetic v block to play with and Wat will become a new compound slide for me lathe i set the V block up in me 4 jaw chuck and direst off all the faces no pics of the next bit but on one side their was a aluminum plug i removed this to gain axises to the workings with a Peace of brass i gave the magnet a thump with a hammer and the front fixings came out with the magnet cleaned it all out re greased it and put it all back together i made a new plug for the back but in stead of aluminum i used sum black nylon bar then taped that in to place the hole in the botom is fore a grub scruw for the stop when turning the magnet off tright pics