03-11-2016, 07:28 PM
The light on the old one is a neon. They run at 90v AC and the 33K resistor drops the line voltage to 90V. The schematic for the knee feed looks like the light is also a neon.
What I suggest is to find a neon panel lamp that's small enough to mount to the cover and wire it in without the resistor (the panel lamp will have the resistor built in). Here's a link to some:
http://www.digikey.com/product-search/en...ageSize=25
EDIT:
Almost forgot, the reason the lamp looks to be wired right across the line is because the schematic is of the circuit board, the power switch is not mounted to it.
What I suggest is to find a neon panel lamp that's small enough to mount to the cover and wire it in without the resistor (the panel lamp will have the resistor built in). Here's a link to some:
http://www.digikey.com/product-search/en...ageSize=25
EDIT:
Almost forgot, the reason the lamp looks to be wired right across the line is because the schematic is of the circuit board, the power switch is not mounted to it.
Logan 200, Index 40H Mill, Boyer-Shultz 612 Surface Grinder, HF 4x6 Bandsaw, a shear with no name, ...
the nobucks boutique etsy shop | the nobucks boutique
the nobucks boutique etsy shop | the nobucks boutique