02-07-2016, 10:41 AM
Willie,
I bore them with the caps on in the same set-up. I may check the fit on the tube with some Prussian blue and if necessary take a thou or two off the parting surfaces and lap them. Although I suspect that won't be necessary.
Tom
I bore them with the caps on in the same set-up. I may check the fit on the tube with some Prussian blue and if necessary take a thou or two off the parting surfaces and lap them. Although I suspect that won't be necessary.
Tom
![[Image: TomsTechLogo-Profile.png]](http://tomstechniques.com/wp-content/uploads/2013/11/TomsTechLogo-Profile.png)