12-31-2015, 11:22 AM
Motor Info as entered:
b0-00: 0 (Asynchronous motor)
d0-00: 1.5 KW
d0-01: 240 (tried 220 and 230 as well)
d0-02: 6.2 amps
d0-03: 60 Hz
d0-04: 1740 RPM
Additional parameters:
b0-12: 60
b0-13: 60
b0-14: 0 (default)
b0-15: 60
b0-21: 10 (tried 4 to 25 - no change)
b0-22: 10 (tried 4 to 25 - no change)
All other settings are left at default, including those relating to the remote console. The VFD responds to its own front panel only.
b0-00: 0 (Asynchronous motor)
d0-00: 1.5 KW
d0-01: 240 (tried 220 and 230 as well)
d0-02: 6.2 amps
d0-03: 60 Hz
d0-04: 1740 RPM
Additional parameters:
b0-12: 60
b0-13: 60
b0-14: 0 (default)
b0-15: 60
b0-21: 10 (tried 4 to 25 - no change)
b0-22: 10 (tried 4 to 25 - no change)
All other settings are left at default, including those relating to the remote console. The VFD responds to its own front panel only.
Mike
If you can't get one, make one.
Hawkeye, proud to be a member of MetalworkingFun Forum since Jan 2013.
If you can't get one, make one.
Hawkeye, proud to be a member of MetalworkingFun Forum since Jan 2013.