BXA QCTP

[TOM REED]

I have never really worked with a QCTP before,I bought a AXA set for my old logan and have installed it but never used it. the handle is orientated so that it is towards the operator when in use. Today was the first day nI really got to play wit my new lathe and make some chips, love it it is very smooth and works well, 2 inch shaft single pass depth over 3/16 with a used carbide in an old toolholder I picked up in a deal, no grunts or groans or bad vibes, I am happy today. Only one small problem perhaps easily fixed but I need some advise. The QCTP handle, toolpost not made by lathe maker, seems to be oriented in the wrong direction or away from the operator and somewhat toward the tailstock. I have taken it apart and there seems to be no way to adjust the direction the handle points other than drill +tap a new hole in the top collar in what would be a more preferable location or to turn the bottom and make a new cam to fit over the present cam and silver solder it in the position of my choice. ANYONE GOT ANY SUGGESTIONS. tom