09-11-2015, 07:13 AM
X and Y lead screw is 10 TPI 1/10 = .100 per rev
I did another indicator check the Z column lead screw must be some where around 8 TPI as 1/8 = .125 per rev
It appears the book is incorrect "that's what the man said"
Yup ill have to take off way cover and verify pitch when I make a dial thanks
I did another indicator check the Z column lead screw must be some where around 8 TPI as 1/8 = .125 per rev
It appears the book is incorrect "that's what the man said"
Yup ill have to take off way cover and verify pitch when I make a dial thanks