Oil furnace build

[dallen]

put some oil on a rag light it and throw in in the furnace then turn on the air, then  turn on the gas slowly until it lights after turning on the oil and making sure its not going to go out close the lid,

IF IT GOES OUT, shut off all fuel and let the blower run for a minute or two to purge any flammable vapors from the furnace before trying to relight it. This is standard precaution for any burner, and yes I've blowed the lid open on mine a couple  times. 

A Rag soaked in some oil on a wire if you think it may blow out and set the grass on fire is all it takes.