07-14-2015, 07:32 AM
drill and thread a hole in the side of the pipe and hook up a gas bottle with an adjustable regulator on it,
remember that the blower is always turned on first, before turning on the gas bottle.
you may also need to do like some do and put a dump valve between the blower and the furnace to control air, or make some type of damper, something as simple as a piece of card stock over the inlet will control air flow.
remember that the blower is always turned on first, before turning on the gas bottle.
you may also need to do like some do and put a dump valve between the blower and the furnace to control air, or make some type of damper, something as simple as a piece of card stock over the inlet will control air flow.
dallen, proud to be a member of MetalworkingFun Forum since Apr 2012.
If life seems normal, your not going fast enough!
If life seems normal, your not going fast enough!