06-30-2015, 02:06 PM
Hi Mike,
I think you have an error on the drawing for the base plate. The horizontal dimension for the 3/4" drill rod guide posts is shown as 2.920" from the center-line. According to my CAD program, that would put part of the rod off of the base. Going by your grid paper, I think the correct dimension should be 2.375" from the center-line. See sketch below (click on it to enlarge it). The one on the left is with the dimension from your drawing and the one on the right is with the 2.375" dimension. Let me know if I'm missing something, which is usually the case.
Ed
I think you have an error on the drawing for the base plate. The horizontal dimension for the 3/4" drill rod guide posts is shown as 2.920" from the center-line. According to my CAD program, that would put part of the rod off of the base. Going by your grid paper, I think the correct dimension should be 2.375" from the center-line. See sketch below (click on it to enlarge it). The one on the left is with the dimension from your drawing and the one on the right is with the 2.375" dimension. Let me know if I'm missing something, which is usually the case.
Ed