05-26-2015, 08:22 PM
This is how I lifted my mill but I'm not entirely sure about your mill Pete. Your idea of taking pictures and posting them is good. There are a lot of people on here who are far more experienced than I.
Actually, I just recalled that Ken advised you not to try to lift it with you hoist. How did you get it on the trailer?
You only need to lift it enough to pull the trailer out. You can use pipe as rollers to move it. That is what I did and it worked very well.
Search around for a manual. I had to join a French machining site to download a free copy of the manual for my Kondia mill. For my new lathe I found one for £9 when orhers wanted £45.
Actually, I just recalled that Ken advised you not to try to lift it with you hoist. How did you get it on the trailer?
You only need to lift it enough to pull the trailer out. You can use pipe as rollers to move it. That is what I did and it worked very well.
Search around for a manual. I had to join a French machining site to download a free copy of the manual for my Kondia mill. For my new lathe I found one for £9 when orhers wanted £45.
Hunting American dentists since 2015.