Where 2 mount ball turner ???

[aRM]

(05-18-2015, 12:43 PM)DaveH Wrote: Normally but not always the cross slide just comes off quite easily.
Turn the handle so the cross slide moves away from you, most times the cross slide will stop moving and the handle just keeps on going around. At this point the thread part has disconnected from the cross slide nut,  the cross slide should slide off (towards the back ) provided there is nothing in the way to stop it.
To make things a little easier you may need to loosen the jib screws a little.

Most cross slides do come off as easy as this.
 
DaveH

Hi DAVE
Good thing U spoke about the Gib Screws 'cos the Supplier did mention that as well.
So U Guys are on track here.

Just a thought, we might need remove our back Splash Guard seeing we have quite a long Cross Slide. We'll only know when we tackle this over the weekend.

Thanks for giving us a very good heads up. It's really reassuring the interest and deep concern reflected here by all U Guys
It is overwhelming in the sense that we can't reciprocate in a similar vein
We can only say "Muchas Gracias" from the deepest recess of our heart - which seems totally inadequate
LORD BLESS
aRM