04-29-2015, 06:47 PM
I'd try grinding the offending spot with a small stone in the Dremel.
Opportune time to post this.
My keyless chuck loves to come loose on the low cost R8 arbour I bought, no scars YET. Why couldn't I warm the chuck in the oven to say 2 or 300 F and instal the spindle. I know you shouldn't have to BUT.
Opportune time to post this.
My keyless chuck loves to come loose on the low cost R8 arbour I bought, no scars YET. Why couldn't I warm the chuck in the oven to say 2 or 300 F and instal the spindle. I know you shouldn't have to BUT.
Free advice is worth exactly what you payed for it.
Greg
Greg