Kondia FV-1 Head disassembly

[Mayhem]

With the hoist in place and tension on the sling, I removed the gib completely. Once finished I lowered the knee back down until the pedestal was just about in contact with the base. I then put the four bolts in finger tight, let the knee all the way down and then put the gib back in. Whilst the pedestal is in contact with the base, I kept some tension on the sling whilst putting the gib in. Finally I removed the sling, and cranked the knee up and down a few times I tightened the bolts on the pedestal. It moves very nicely.