03-18-2015, 05:48 PM
Without the second mortgage, I'd see if I could find some rocking-horse droppings to make my own out of...
Option 1 sounds feasible, inexpensive, within most folks in here's capabilities - it's what I'd go with, can't see any advantage in the other options!
There's very little force required to counteract the wheel forces on a surface grinder (if you're using it right), most of the effort goes into moving the table, whcih is why they can have high-geared manual handles that move it through its range with a single turn or less
Option 1 sounds feasible, inexpensive, within most folks in here's capabilities - it's what I'd go with, can't see any advantage in the other options!
There's very little force required to counteract the wheel forces on a surface grinder (if you're using it right), most of the effort goes into moving the table, whcih is why they can have high-geared manual handles that move it through its range with a single turn or less
Rules are for the obedience of fools, and the guidance of wise men...
(Douglas Bader)
(Douglas Bader)