03-12-2015, 06:39 AM
(This post was last modified: 03-12-2015, 06:44 AM by Bill Gruby.)
Good Morning Ed;
Sheet 2 of 15 (Back Plate) the ten .170 clearance holes need to be changed to .257, clearance for 1/4-28 screws. These are for the three Bearing Blocks and the two Yoke Guides.
"Billy G"
Sheet 2 of 15 (Back Plate) the ten .170 clearance holes need to be changed to .257, clearance for 1/4-28 screws. These are for the three Bearing Blocks and the two Yoke Guides.
"Billy G"