03-07-2015, 06:38 PM
I just found this site and was exploring wen I found this place.
Years ago a fellow tried to do a trigger job on a Mossburg 22 mag and flummoxed the trigger part so bad it wouldn't cock at all. As it was an unavailable factory part, I ground a notch where the case hardened part of the trigger was origonally located and silver soldered in a piece of 1/8 square tool steel in it's place. The angle was odd so I build a fixture to hold it in the tool and cutter grinder and "snuck" up on the exact angle that way. The trigger pull was as crisp glass breaking and a easy 2 1/2 lbs. He was happy even with a larger bill that I quoted.
Years ago a fellow tried to do a trigger job on a Mossburg 22 mag and flummoxed the trigger part so bad it wouldn't cock at all. As it was an unavailable factory part, I ground a notch where the case hardened part of the trigger was origonally located and silver soldered in a piece of 1/8 square tool steel in it's place. The angle was odd so I build a fixture to hold it in the tool and cutter grinder and "snuck" up on the exact angle that way. The trigger pull was as crisp glass breaking and a easy 2 1/2 lbs. He was happy even with a larger bill that I quoted.