02-03-2015, 10:13 PM
yes it was built off of a casting for the action, most of the internals were cut on a flow jet but still left a ton of work. Barrel is from GM, it started out at 1.375 diameter, which was profiled down to a Winchester #6 profile. the rifle tips the scales at roughly 15 pounds, but handles nice. Pixman helped me out with a couple of the Tang Sight parts.
DA
DA
dallen, proud to be a member of MetalworkingFun Forum since Apr 2012.
If life seems normal, your not going fast enough!
If life seems normal, your not going fast enough!