01-30-2015, 07:39 AM
I'm a bit slow to get here Dave but my cylinder mount is 3/4" thick by 9.5" long and the pin hole is 7.5" up from the I beam, no backplate necessary.
Given that my machine develops more tonnage than yours , I'm sure you'd be fine.
The only problem I see is that simplifying the mounting would involve less welding and hence less practice for you.
Steve
Given that my machine develops more tonnage than yours , I'm sure you'd be fine.
The only problem I see is that simplifying the mounting would involve less welding and hence less practice for you.
Steve
Busy Bee 12-36 lathe, Busy Bee Mill drill, Busy Bee 4x6 bandsaw, Homemade 9x17 bandsaw, Ad infinitum.