right the first thing to do with the two that is complete is to give them a wire brush and give them a bath in acid all the drills are inch but will be marked up in MM the two that is broken new drill bits will be fitted the drill bit sises is the two complete ones one is 25/64 the other is 13/32 and the two broken ones one is 5/32 and the other one is 15.64 i then unsoldiered the two broken ones and the drills will be repast the 5/32 will be replaced with a 4mm drill and the 15/64 Will be replaced with a 6.3 mm drill right pics
krv3000, proud to be a member of MetalworkingFun Forum since Feb 2012.