11-15-2014, 08:59 PM
Todays progress.
Bolted the rear part of the frame to the transaxle, had to make a couple of recesses to clear bolts that looked like they'd miss in the original design. After a couple of attempts I got the motor mounting plate to fit, (made a new drawing on the shop computer but read the dimensions on the print wrong, the plasma cuts out exactly what you tell it).
The good news is the shafts line up. Will have to put a bit of a twist in the exhaust to clear the frame but that shouldn't be an issue,
![[Image: IMG_1498.jpg]](https://lh6.googleusercontent.com/-ehbSLEZf2cU/VGgBG0B-Q3I/AAAAAAAACdE/HGXDld8Fcec/s1280/IMG_1498.jpg)
![[Image: IMG_1497.jpg]](https://lh4.googleusercontent.com/-FE8Dy6snBVU/VGgBGupNd-I/AAAAAAAACdA/A_p9nKf2qh0/s1280/IMG_1497.jpg)
Bolted the rear part of the frame to the transaxle, had to make a couple of recesses to clear bolts that looked like they'd miss in the original design. After a couple of attempts I got the motor mounting plate to fit, (made a new drawing on the shop computer but read the dimensions on the print wrong, the plasma cuts out exactly what you tell it).
The good news is the shafts line up. Will have to put a bit of a twist in the exhaust to clear the frame but that shouldn't be an issue,
Free advice is worth exactly what you payed for it.
Greg
Greg