Kondia FV-1 Head disassembly

[Mayhem]

Thanks Ken,

Yes, the hub locates perfectly and the detent has three distinct stops, as it should. I did indeed ream the pivot pin hole and the pin slipped right in. However, the lever doesn't actuate the plunger. The lever tip it too long, so I need to shorten it a little. Interestingly, the lever is a new one from Kondia, so I would have expected that the position of the pivot pin would suit this lever, given that the print for the feed trip bracket was obviously a revision of the one for my machine.

I'm not fussed at all and I know the feed trip bracket you made me is a massive improvement on the cast ones. I'm confident that I will have it working soon.