10-27-2014, 06:31 AM
Willie,
I wouldn't use a rasp that close to the finish contour. A double-cut half round bastard (not John) would be safer and more appropriate. Just get close and then switch over to sandpaper on a stick to finish up. Start with 60 grit and work your way down, extending well up into the curved section for a good blend.
Tom
I wouldn't use a rasp that close to the finish contour. A double-cut half round bastard (not John) would be safer and more appropriate. Just get close and then switch over to sandpaper on a stick to finish up. Start with 60 grit and work your way down, extending well up into the curved section for a good blend.
Tom
![[Image: TomsTechLogo-Profile.png]](http://tomstechniques.com/wp-content/uploads/2013/11/TomsTechLogo-Profile.png)