08-16-2014, 12:40 PM
Marci,there have been two previous posts regarding the above, after responding to the first I found the second and edited the first and before having a go at the second I checked for more and found the third.
I have some experience with this type of aluminum extrusion and am willing to share my experiences.
For now I will wait to see if there are any more posts.
They should have been posted under the same heading for continuity for the reader/responders.
I have some experience with this type of aluminum extrusion and am willing to share my experiences.
For now I will wait to see if there are any more posts.
They should have been posted under the same heading for continuity for the reader/responders.
Busy Bee 12-36 lathe, Busy Bee Mill drill, Busy Bee 4x6 bandsaw, Homemade 9x17 bandsaw, Ad infinitum.