07-30-2014, 01:34 PM
Cheers Lads
Any photos Darren you do a bit smithing ?
Well a tad more done tonight , made a start on the fire pot , this is made from some 1/2 BMS ,STUCK together .
Tacked
Hole in the bottom will be machined in after welding ,as it would not stay round if it were machined in first then welded .
Just needs a flange welded on around the top .
Time for a Cuppa .
Rob
(07-30-2014, 07:11 AM)Mayhem Wrote: I have the same approach on a number of projects, including the wheel rim forge I made.
Any photos Darren you do a bit smithing ?
Well a tad more done tonight , made a start on the fire pot , this is made from some 1/2 BMS ,STUCK together .
Tacked
Hole in the bottom will be machined in after welding ,as it would not stay round if it were machined in first then welded .
Just needs a flange welded on around the top .
Time for a Cuppa .
Rob