06-27-2014, 09:12 AM
Here is the top die.
It is about 30mm too long, I left that to hold it in the 4 jaw.
Also the top flat is only 1.5 mm wide I need to make it 2.5mm or so.
Cut to length - making sure it fits and all held together with "ticky tape"
DaveH
It is about 30mm too long, I left that to hold it in the 4 jaw.
Also the top flat is only 1.5 mm wide I need to make it 2.5mm or so.
Cut to length - making sure it fits and all held together with "ticky tape"
DaveH