06-22-2014, 12:06 PM
(This post was last modified: 06-22-2014, 12:14 PM by the penguin.)
On the Jet lathe, I have a Bison chuck with the 2 piece reversible jaws, when I change the jaw orientation, I want them to be tight. I found the little torque limiting wrench with a 3/8" drive, it has only one setting, 10 ft/lbs. So that what I've been using for the last year or so. I have absolutely no idea where came from, but I've checked this with 2 other torque wrenches and its dead nuts on. So it rest in the lathe tool drawer.
It says Seekonk Precision Tools on the handle
1 - the tool
2 - armed with the 8 mm allen bit
3 - in use
I fixed the neighbors lawnmower, today and had to switch the jaws and use it, so I thought I would show it to you guys.
It says Seekonk Precision Tools on the handle
1 - the tool
2 - armed with the 8 mm allen bit
3 - in use
I fixed the neighbors lawnmower, today and had to switch the jaws and use it, so I thought I would show it to you guys.
jack