06-08-2014, 05:25 AM
The tank on my splitter is 30" x 6" x4" equalling approx. 12 Liters if you include the filter. It may be undersize compared to the theoretical recommendation but performs well, doesn't get too hot (my opinion) and the fluid still looks clean as new.
Most of my splitting is done at the higher speed, lower pressure of my 2 speed pump and only drops to low speed high pressure for brief periods when knots and twisted grain come into play.
Most of my splitting is done at the higher speed, lower pressure of my 2 speed pump and only drops to low speed high pressure for brief periods when knots and twisted grain come into play.
Busy Bee 12-36 lathe, Busy Bee Mill drill, Busy Bee 4x6 bandsaw, Homemade 9x17 bandsaw, Ad infinitum.