06-05-2014, 07:22 AM
Got the checklist.... at the bottom was "make sure the drive wheel doesn't have any axial movement (in and out). Uh, it has always had about a 1/4" of slop since I got it (used).
Need to address that issue first, then see what else happens. Does explain why it worked fine in vertical mode (blade never pops off), but in horizontal very hit and miss (frustrating!)
Oh... got a bunch of drops. 2.5" thick by 8" diameter. I wonder what the longest sawzall blade I can buy is.
Need to address that issue first, then see what else happens. Does explain why it worked fine in vertical mode (blade never pops off), but in horizontal very hit and miss (frustrating!)
Oh... got a bunch of drops. 2.5" thick by 8" diameter. I wonder what the longest sawzall blade I can buy is.
roundrocktom, proud to be a member of MetalworkingFun Forum since Mar 2014.