04-06-2014, 07:31 PM
My youngest son and I were out and about, he would have been 3 or 4 at the time, someone asked me what I did, told them engineer, he looks at me and says, Dad no your not , you don't drive a train.
No dumpsters around here so had to go dump diving. Good day, this little 12 inch bandsaw, (the trunion under the table was broke, welded it up) a new oil can, (never had oil in it), 3/8 and 5/8 threaded rod, new, a #40 roller chain still sealed in the bag, and a light stand for my led flood light.
![[Image: IMG_1112.jpg]](https://lh6.googleusercontent.com/-MxMGNfth9eU/U0HvoSzfd8I/AAAAAAAACBM/4zC66NgaXx0/s912/IMG_1112.jpg)
Its pretty light but may try setting it up for light metal work. All aluminum frame but the table is iron. Need about 25:1 reduction to get it slow enough.
No dumpsters around here so had to go dump diving. Good day, this little 12 inch bandsaw, (the trunion under the table was broke, welded it up) a new oil can, (never had oil in it), 3/8 and 5/8 threaded rod, new, a #40 roller chain still sealed in the bag, and a light stand for my led flood light.
Its pretty light but may try setting it up for light metal work. All aluminum frame but the table is iron. Need about 25:1 reduction to get it slow enough.
Free advice is worth exactly what you payed for it.
Greg
Greg