04-23-2012, 07:42 AM
The only problem I can see with shimming down the apron front plate is it will result in less engagement with the rack.
The answer there might be to shim the rack down equally but I guess that would require slotting the screw holes (if they aren't already).
The answer there might be to shim the rack down equally but I guess that would require slotting the screw holes (if they aren't already).
Busy Bee 12-36 lathe, Busy Bee Mill drill, Busy Bee 4x6 bandsaw, Homemade 9x17 bandsaw, Ad infinitum.