Tractor repair

[TomG]

(12-07-2013, 08:08 PM)f350ca Wrote: Made the bushings today. The chap Im doing it for had some 2 1/2 solid brass bar. First drilled with my largest bit 1 1/4. Had to reduce the clearance angles, it sure wanted to grab.

Ya didn't watch the video I made on grinding drills for use in plastics and brass. All you need to do is eliminate of the positive rake on the drill and it won't pull in on you.

That's gonna be a happy tractor (and owner) when you are through.

Tom