Made the bushings today. The chap Im doing it for had some 2 1/2 solid brass bar. First drilled with my largest bit 1 1/4. Had to reduce the clearance angles, it sure wanted to grab.
![[Image: IMG_0902.jpg]](https://lh5.googleusercontent.com/-jkJGAqe5zeA/UqPFJA4FoGI/AAAAAAAABuU/D29W4-7pT4g/s1280/IMG_0902.jpg)
Then turned the OD and bored to size and parted.
![[Image: IMG_0903.jpg]](https://lh4.googleusercontent.com/-mNJ3UKjQXqc/UqPFKDegzrI/AAAAAAAABug/N91C1qYWPOM/s1280/IMG_0903.jpg)
The finished product.
![[Image: IMG_0904.jpg]](https://lh4.googleusercontent.com/-1HbcLyoYFGo/UqPFKPrM55I/AAAAAAAABuc/ceW6p9Z4u3w/s1280/IMG_0904.jpg)
Now have to pin the spline on the steering arms, wish I could remember how i did the last one.
Then turned the OD and bored to size and parted.
The finished product.
Now have to pin the spline on the steering arms, wish I could remember how i did the last one.
Free advice is worth exactly what you payed for it.
Greg
Greg