04-20-2012, 03:00 AM
Tony I really thank you and the others for your help but the numbers aren't adding up for me. Example: How far to cut the bevel in from the sides. Outer dim = .835 minus the smaller top diameter .6560 = .179 divide that by 2 = .0895. Your drawing is showing .0883 from top to bottom of that cut, which should be the same as the depth of cut from right to left. Am I looking at this correctly?
Next is the overall height from the bottom of the bottom cut to the top of the top cut. Drawing shows .2220. That minus the flat area of .0235 = .1985 divide that by 2 and I get .09925 where the drawing is calling for .0883.
Sorry to be such a bother but when I can't get the number to work out I get hung up and don't know which way to go. These are the diamentions that I am looking for, once I get the staright I feel I will be able to tackel this project.
Thanks again for all the input.
Next is the overall height from the bottom of the bottom cut to the top of the top cut. Drawing shows .2220. That minus the flat area of .0235 = .1985 divide that by 2 and I get .09925 where the drawing is calling for .0883.
Sorry to be such a bother but when I can't get the number to work out I get hung up and don't know which way to go. These are the diamentions that I am looking for, once I get the staright I feel I will be able to tackel this project.
Thanks again for all the input.