10-29-2013, 06:03 AM
Hi Wong,
The work piece won't tend to "pop off" the turning of the tap pushes it down.
I have to say I wondered about it bouncing off or something which is why I used a hex head screw as the spindle (with a bush) - then it can't come off until the screw is removed.
DaveH
The work piece won't tend to "pop off" the turning of the tap pushes it down.
I have to say I wondered about it bouncing off or something which is why I used a hex head screw as the spindle (with a bush) - then it can't come off until the screw is removed.
DaveH