10-23-2013, 09:18 AM
Forgot to mention, the vibrator seamed to work well, the proof will be when I pull the forms in a day or two. Could pull them now but the edges would be fragile and might get bumped in the shop. will probably spray them down and cover them with plastic today.
Don't remember doing a thread on the counters before Tom. Might have mentioned the grinder though. Bought the wheel from a Canadian supplier as I do with the polishing pads, too much drama getting things over the border. Your right, the last grinder was on an arm that allowed the head to raise on the high spots, but bottom out on a stop. Once flat it stayed on the stop.
Don't remember doing a thread on the counters before Tom. Might have mentioned the grinder though. Bought the wheel from a Canadian supplier as I do with the polishing pads, too much drama getting things over the border. Your right, the last grinder was on an arm that allowed the head to raise on the high spots, but bottom out on a stop. Once flat it stayed on the stop.
Free advice is worth exactly what you payed for it.
Greg
Greg