10-10-2013, 12:57 PM
Tom is probably right that white glue will work, yellow glue is maybe better.
When I want to do an invisable repair in wood I am very careful about lining up the grain in the correct direction, wet both pieces with denatured alcohol and look at them in the same light, in the same direction. One way will look darker than the other.
My next favorite trick is to glue the repair in with 5 minute epoxy tinted with a little powdered stain. Be careful, a little goes a long way (stain and glue).
Larry
When I want to do an invisable repair in wood I am very careful about lining up the grain in the correct direction, wet both pieces with denatured alcohol and look at them in the same light, in the same direction. One way will look darker than the other.
My next favorite trick is to glue the repair in with 5 minute epoxy tinted with a little powdered stain. Be careful, a little goes a long way (stain and glue).
Larry
LJP, proud to be a member of MetalworkingFun Forum since Aug 2013.