09-07-2013, 08:37 PM
I tried to ram this thing up again this morning and pull it back out of the sand but didn't have any luck with it yet so I decided to leave the thing alone for the day and do something else.
I don't have the handcrank to is used to adjust the table and a couple of other things on the shaper so since they are cast I decided I should cast one plus I want it out of brass or bronze.
So here's the crank
![[Image: crank-handle-0003.jpg]](http://i1222.photobucket.com/albums/dd484/Superdave257/crank-handle-0003.jpg)
I don't have the handcrank to is used to adjust the table and a couple of other things on the shaper so since they are cast I decided I should cast one plus I want it out of brass or bronze.
So here's the crank
![[Image: crank-handle-0003.jpg]](http://s1222.photobucket.com/user/Superdave257/media/crank-handle-0003.jpg.html)
dallen, proud to be a member of MetalworkingFun Forum since Apr 2012.
If life seems normal, your not going fast enough!
If life seems normal, your not going fast enough!