flat belt pulley pattern

[dallen]

(09-01-2013, 04:28 PM)Rickabilly Wrote: Does that "fillet wax" take paint ? usually paint goes all "Fish eyes" when you try and put it over even the slightest bit of wax.

Rick

I haven't had any trouble with it, its made for pattern work, kinda like the stuff that john used except his was in a block, I usually put shellac on it but it always covers even with some on a leadscrew support pattern that I used some of the wax on.

Instructions (like I read and obey them) say to put on one or two coats of finish then apply the wax fillet then finish the paint job. for this which had better be a one time affair I kinda short cut that first part of the one or two coats. the Stuff does look pretty good under the shellac thou.

DA