08-19-2013, 11:25 PM
started cutting all the extra weigh off of the second one just have to see how far I get before something smacks me on the forehead and say's you just screwed up again.
anyway heres where I am at for the night
the start of the machine work on this one was to deck the outside face so I can flip it over and clamp it down thru the hole to do the end that mounts to the table slide
![[Image: second-try00004.jpg]](http://i1222.photobucket.com/albums/dd484/Superdave257/second-try00004.jpg)
Second operation for tonight was to bore out the hole where the leadscrew passes thru the part that is sitting in the bore goes in from the otherside.
![[Image: second-try00005.jpg]](http://i1222.photobucket.com/albums/dd484/Superdave257/second-try00005.jpg)
anyway heres where I am at for the night
the start of the machine work on this one was to deck the outside face so I can flip it over and clamp it down thru the hole to do the end that mounts to the table slide
![[Image: second-try00004.jpg]](http://s1222.photobucket.com/user/Superdave257/media/second-try00004.jpg.html)
Second operation for tonight was to bore out the hole where the leadscrew passes thru the part that is sitting in the bore goes in from the otherside.
![[Image: second-try00005.jpg]](http://s1222.photobucket.com/user/Superdave257/media/second-try00005.jpg.html)
dallen, proud to be a member of MetalworkingFun Forum since Apr 2012.
If life seems normal, your not going fast enough!
If life seems normal, your not going fast enough!