Part for the Cinci

[dallen]

I know how everyone likes pictures so heres a couple more to add to the list

first on is after I just opened the mold top part of the pattern pulled out find, some minor tearing of the sand but nothing that won't clean up with a file.



second is of the other side pulled out could use a little more draft but not worth the time for what maybe two pours.



third is of the mold closed up and waiting for hot metal, if it cools down and the humidity drops some, got about an inch of rain last night.



am looking at doing this first pour in aluminum to see if there is any wash outs when the molten metal runs into the cavity, I usually don't gate in the top but have been doing it that way the last couple of pours I have done and like the results, plus I have been putting in runners so that any trash in the pouring basin or runners gets pushed into a corner instead of into the mold cavity which helps with cleaner castings.

DA