07-19-2013, 03:24 PM
(This post was last modified: 07-19-2013, 03:47 PM by doubleboost.)
Pictures of the cutter in my boring bar
The bar is 24 mill bright steel bar
The cutter is a 1/4 inch broken centre drill
![[Image: IMG_4945_zpse4f40d43.jpg]](http://i261.photobucket.com/albums/ii63/john970s0/IMG_4945_zpse4f40d43.jpg)
![[Image: IMG_4947_zps47befb06.jpg]](http://i261.photobucket.com/albums/ii63/john970s0/IMG_4947_zps47befb06.jpg)
As you can see it is locked in place with 2 bolts (flat ground on to cutter)
The depth of cut is measured with a clock guage directly on to the cutter
A block and small bolt are held on to the back of the bar and used to push the cutter through
John
The bar is 24 mill bright steel bar
The cutter is a 1/4 inch broken centre drill
![[Image: IMG_4945_zpse4f40d43.jpg]](http://s261.photobucket.com/user/john970s0/media/IMG_4945_zpse4f40d43.jpg.html)
![[Image: IMG_4947_zps47befb06.jpg]](http://s261.photobucket.com/user/john970s0/media/IMG_4947_zps47befb06.jpg.html)
As you can see it is locked in place with 2 bolts (flat ground on to cutter)
The depth of cut is measured with a clock guage directly on to the cutter
A block and small bolt are held on to the back of the bar and used to push the cutter through
John