New Log Splitter

[stevec]

(05-30-2013, 08:30 AM)f350ca Wrote: For reference what size and height is the backer?

Greg, the backer is (was) 18" tall, 6" for the H-beam so it's as tall as the splitting face of the wedge 12"
3 pcs welded as below.
       
The sides are 1/2" x 2'' x 18", the centre is 5/8" x 1¼" x 18"
The sides are beveled 45° where the split log will be further spread.
The weak part is where I notched the backer to fit the top of the H beam. I figured my weld would restore it's strength, not so much.