04-30-2013, 05:21 AM
(04-29-2013, 07:37 PM)Tony Wells Wrote: Agree with Tom. You should be good to go. If you wanted to test them, block up the ends and put a little pressure on the center. If they're cast, they'll crack easily. I don't mean so much that you bend them, but just enough to know they won't crack in two.
As always, safety glasses/shield wise during press work. You never know what's going to come flying out. It's pretty unnerving testing a newly built press....
A full face shield will definitely be worn when I use the press.
Ed