Shop Press

[DaveH]

(04-27-2013, 06:24 AM)EdK Wrote: Thanks guys. I think I'm going to mount it on wheels and also make provisions for bolting it to the wall just in case it's needed at some point.
Do you guys just use a wheel in each corner or do you have one under each of the long uprights also, where most of the weight sits?

Ed

Ed,
Basically I put a wheel at each corner. Care is still required to move the press mainly because it tends to be top heavy. So I always move it by pulling it towards me, then push it in the direction of the long uprights.
That is to say I push on one upright in the direction to the other direction.
Clean as mud
Yikes, this turned out difficult to explain.

DaveH