Ford tractor manifold mig welded.

[aametalmaster]

My neighbor bought a 1942 2N Ford this winter and someone had brazed a crack in the manifold. So he got out his die grinder and ground the crack almost all the way around and left a hole on the backside. I wanted him to remove the part so i could mig it properly but he resisted. So today i mig welded it up. Considering the rust and the nozzle didn't fit between the motor and manifold i think it turned out pretty good. Crown Alloys 44-30 .035 cast iron mig wire and 75/25 gas...Bob