03-09-2013, 08:11 AM
Looking wonderful Bill,
I am hanging on every post.
Ref the question about pining the crank pins. On the 500 singleI used a slot drill to make a hole on the line of the joint,
and fitted a grub screw.
Just my 2c worth.
Best regards--Brian.
I am hanging on every post.
Ref the question about pining the crank pins. On the 500 singleI used a slot drill to make a hole on the line of the joint,
and fitted a grub screw.
Just my 2c worth.
Best regards--Brian.
