03-31-2012, 10:26 AM
I have fitted some on my WM14 (slightley smaller than a Grizzley G0704 but same head internals) It came with one fitted the X was a stright fix but the Y was not I used glass scales as I had fitted the chinnese ones in the past and they had not been that sucsesful on the previouse mill an X1 the main thing is to cover whatever you fit up if you want them to last. the Y had to be fitted on an angle to be out of the way of the swarf the X dro was re mounted with a backing plate befor the cover was fitted i did not like the blocks I had used so got a cover kit from http://www.machine-dro.co.uk/digital-rea...cover.html they have them at silly prices at the moment.
Peter
Peter