02-13-2013, 10:22 AM
Looks like that will do the job dallen.
I've never bothered with calculating the ideal diameters and have never had a problem with bad knurls, so I doubt that it's very critical. Working the numbers though, .875 is an ideal diameter for a 20 pitch (.05") knurl, or any diameter in increments of .016" either side of .875.
Tom
I've never bothered with calculating the ideal diameters and have never had a problem with bad knurls, so I doubt that it's very critical. Working the numbers though, .875 is an ideal diameter for a 20 pitch (.05") knurl, or any diameter in increments of .016" either side of .875.
Tom
![[Image: TomsTechLogo-Profile.png]](http://tomstechniques.com/wp-content/uploads/2013/11/TomsTechLogo-Profile.png)